Federal University of Technology, Minna Institutional Repository >
Dissertation and Thesis >
Please use this identifier to cite or link to this item:
|Title: ||NICKEL PLATING OF METALS|
|Authors: ||SEDICK, FOLASHEDE MEDINAT|
|Issue Date: ||Dec-2000|
|Abstract: ||The electroplating of some metals (steel, brass and copper) were done using -Nickel
solution and pure Nickel anodes, the experiment was carried out at room temperature .with proper agitation varying voltage, current and time. The best condition for bright appearance for steel plaiting 3v,1.0v and 20mins.
Brass plating are 3v, O.6A and lOmins.
Coppcr plating arc 3v, O.5A and IOmins.
The physical appearance and thickness was noted, they are subjected to various test and it was obtained that a thin coating is good to increase the harden ability, the
strength, ductility and serve as decorative and protective function. A mathematical model
was also formed using polymath 3, from the experimental result Nickel deposit was
found to produce a variety of finishes.|
|Description: ||THIS PROJECT IS SUBMITTED TO THE DEPARTMENT OF CHEMICAL ENGINEERING, SCHOOL OF ENGINEERING AND ENGINEERING TECHNOLOGY IN PARTIAL FULFILLMENT OF THE REQUIREMENT FOR THE AWARD Of BACHELOR OF ENGINEERING (B.ENG.) IN CHEMICAL ENGINEERING|
|Appears in Collections:||Thesis|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.